HiModel
INTELLECTIVE ONBOARD OPTOCOUPLER REMOTE CONTROL SWITCH RCD3027
| Input voltage | 6-12V |
, , , , , , Specifications:, , , , , , , , , , , Input current (max): 6A, Optocoupler signal input, Noise/signal lost interference filtering, Low power consumption, , ,
Features: RCD3027 is an intellective onboard optocoupler remote control switch, ...HiModel
5V,6V/ 5A BEC OUTPUT SWITCH HARNESS W/LED VOLTAGE METER
| Input volt range | 6V to 13V |
| Output voltage | 5V /6V (output voltage selectable via a switch) |
| Voltage meter display range | 4 to 13V |
| Wire type | silicon wire, AWG24 |
| Wire length | 14cm |
| Connector Type | output Futaba/JR compatible |
, , , , , , Specifications:, , , , , , , , , , , 5V,6V/ 5A BEC Output Switch Harness W/LED Voltage Meter, Max Current: 5A, input JST connector, * The output voltage can only be 5V or 6V., , ,
Includes/Requires: Includes: 1 x switch harness (with BEC output and ...1 Reviews
HiModel
15A LARGE CURRENT 2-WAY SWITCH HARNESS
| Max Current | 15A (each switch) |
| Wire type | silicon wire, AWG24 |
| Wire length | 15cm |
| Connector Type | Futaba/JR compatible |
| Switch number | 2 switches (separated from each other) |
, , , , , , Specifications:, , , , , , , , , , , 15A Large Current 2-way Switch Harness, , ,
Includes/Requires: Includes:1 x switch harnessHiModel
25A LARGE CURRENT SWITCH HARNESS W/LED VOLTAGE METER
| Max Current | 20A |
| Wire type | silicon wire, AWG24 |
| Wire length | 15cm |
| Connector Type | Futaba/JR compatible |
, , , , , , Specifications:, , , , , , , , , , , 25A Large Current Switch Harness W/LED Voltage Meter, , ,
Includes/Requires: Includes: 1 x switch harness 20AHiModel
INPUT 6-12V/ OUTPUT 1.4V ON-BOARD GLOW PLUG VOLTAGE REGULATOR
| Power input | 6V to 12V/ 2-3S Lipo |
| Output | 1.4V |
| Weight | 19.3g / 0.68oz (including wires, connectors) |
| Typical application | Any model using glow plug engine. |
, , , , , , Specifications:, , , , , , , , , , , Max output currency: 6A, , ,
Features: ■ 6V ~12V auto-detect ■ Touch button, 15 seconds ...2 Reviews
HiModel
2.5-25V INPUT, 3-25V OUTPUT STEP-UP VOLTAGE REGULATOR
| Input current | 4A (max) when input voltage is above 3V; peak 5A (less then 10 seconds) |
| Wrong polarity protection | No, wrong polarity will burn the PCB directly. |
| Low voltage protection | Yes (when low voltage protection is activated, the output voltage will be equal to input voltage) |
| Weight | 6.7g |
| Size | 3x1.8x1.3 cm |
, , , , , , Specifications:, , , , , , , , , , , Input voltage：2.5-25V, Output voltage：3-25V adjustable, Efficiency：Max 95%, Working temperature： -40℃ to +85℃ （when temperature is above 40℃, heat sink must be applied）, Output ripple：, Input 3.7V output 5V 2A ripple 40mV, Input 5V Output 12V 0.5A ripple 25mV, Input 5V Output 12V 1A ripple 40mV, Input 5V Output 12V 1.5A ripple 60mV, Input 12V Output 24V 1A ripple 80mV, Short circuit protection：No, *This device is specially introduced to those experienced DIYers, basic electronic knowledge and DIY/welding skills are required, we are not responsible for damages due to lack of welding skills or wrong wirings etc., *Check the output voltage and adjust the virable resistor to adjust the voltage if needed before connect to your device., , ,
Features: This is the step-up voltage regulator unit. Includes/Requires: Includes: ...1 Reviews
HiModel
4.5-35V INPUT, 1.25-30V OUTPUT STEP-DOWN VOLTAGE REGULATOR
| Wrong polarity protection | No, wrong polarity will burn the PCB directly. |
| Weight | 11.7g |
| Size | 5x2.3x1.3 cm |
, , , , , , Specifications:, , , , , , , , , , , Input voltage：4.5-35V, Output voltage：1.25-30V adjustable, Output current：constant 2A， Max 3A（with heat sink), heat sink must be attached when output is over 15W. (heat sink is not included in this unit), Efficiency：Max 92%, Switching frequency：150KHz, Minimum voltage difference：2V (the output voltage is lower than input voltage), Working temperature： -40℃ to +85℃ （output power within 10W ）, Output ripple：, Input 12V output 5V 3A 15mV(MAX), Input 24V Output 12V 3A 40mV(MAX), Dynamic respond speed：5% 200uS, Short circuit protection：limit current, auto-resume, *This device is specially introduced to those experienced DIYers, basic electronic knowledge and DIY/welding skills are required, we are not responsible for damages due to lack of welding skills or wrong wirings etc., *Check the output voltage and adjust the virable resistor to adjust the voltage if needed before connect to your device., , ,
Features: This is the step-down voltage regulator unit. Includes/Requires: Includes: ...1 Reviews
HiModel
HOBBYWING FLYFUN SERIES 30A 2-4S SPEED CONTROL FOR AIRPLANE/HELICOPTER FLYFUN-30A-W - WITH MOTOR WIRES
| 1.1 Output | Continuous 30A, Burst 40A up to 10 seconds. |
| 1.2 Input Voltage | 2-4 cells lithium battery or 5-12 cells NiCd/NiMh battery. |
| 1.3 BEC | 2A / 5V Linear mode BEC. |
| 1.4 Refresh rate of the throttle signal | 50Hz to 432Hz. |
| 1.5 Max Speed | 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. |
| 1.6 Size | 55mm*25mm*9mm. |
| 1.7 Weight | 25.8g. |
, , , , , , Specifications:, , , , , , , , , , , Specification, (BLM = BrushLess Motor), , ,
Features: Features 1 Safety arming feature: Regardless the throttle stick ...HiModel
HOBBYWING FLYFUN SERIES 18A 2-4S SPEED CONTROL FOR AIRPLANE/HELICOPTER FLYFUN-18A-W - WITH MOTOR WIRES
| 1.1 Output | Continuous 18A, Burst 22A up to 10 seconds. |
| 1.2 Input Voltage | 2-4 cells lithium battery or 5-12 cells NiCd/NiMh battery. |
| 1.3 BEC | 2A / 5V Linear mode BEC. |
| 1.4 Refresh rate of the throttle signal | 50Hz to 432Hz. |
| 1.5 Max Speed | 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. |
| 1.6 Size | 55mm*25mm*6mm. |
| 1.7 Weight | 21g. |
, , , , , , Specifications:, , , , , , , , , , , Specification, (BLM = BrushLess Motor), , ,
Features: Features 1 Safety arming feature: Regardless the throttle stick ...HiModel
3-35V INPUT, 1.2-30V OUTPUT STEP-DOWN & STEP-UP VOLTAGE REGULATOR (FOR FPV)
| Output voltage：mode 1 | 1.25-30V adjustable; mode 2 |
| Input current | 2A (MAX) |
| Output power | 12W under natural cooling condition and input voltage higher than 10V, 20W with heat sink. |
| Idle current | 10mA ( under 10-14V input and 12V output) |
| Wrong polarity protection | No, wrong polarity will burn the PCB directly. |
| Size | 5x2.3x1.1 cm (excluding potentiometer) |
, , , , , , Specifications:, , , , , , , , , , , 3-35V Input, 1.2-30V Output Step-down & Step-up Voltage Regulator (for FPV), Input voltage：3-35V, Output current：constant 1A (when output at 12V); 1.5-2A when output is set to 5V., Working temperature： -40℃ to +85℃ （output power within 10W ）, Dynamic respond speed：5% 200uS, Short circuit protection：Yes (10 seconds), *This device is specially introduced to those experienced DIYers, basic electronic knowledge and DIY/welding skills are required, we are not responsible for damages due to lack of welding skills or wrong wirings etc., *Check the output voltage and adjust the virable resistor to adjust the voltage if needed before connect to your device., , ,
Features: This is the step-down and step-up integrated voltage regulator, ...HiModel
5 INCH 800X480 RESOLUTION TFT LCD FIELD MONITOR W/FOLDABLE SUNLIGHT SHIELD
| Power input | DC 7-12V |
| Screen size | 5 inch |
| Screen resolution | 800x 480 |
| Signal input | one Audio, one video (RCA connectors) |
| Dimension | 189 x 131 x 31mm |
| Weight | 400g |
Specifications:, 5 inch 800x480 Resolution TFT LCD Field Monitor W/Foldable Sunlight Shield, Brightness 350cd/, ㎡ (max), Power consumption:, ≤8W, Audio output power:, ≤1W, * Factory is using a general packaging which is used for many types of monitors, many descriptions on the packing do not apply to this specific product, please disregard the discrepancies on the outer package., ,
Features: Foldable sunlight shield design, compact in size once fold ...HiModel
HL W46-30 400KV OUTRUNNER BRUSHLESS DISK TYPE MOTOR FOR 600-800 CLASS MULTI-ROTOR AIRCRAFT (FOR 6S)
| Model | W46-30 400KV |
| Idol current | 1.4A at 22.2V |
| Net weight | 186g (excluding prop adaptor) |
| Mounting hole spacing | 25mm/ 25mm (cross side) |
| Max cell number supported | 6S Lipo |
| Wire length | 50CM |
| Mounting hole spacing | 25mm/25mm (cross side) |
| Max current | 26A |
| Working current | <21A |
| Max power | 560W |
| Internal resistance | 0.069Ω |
Specifications:, ,
Includes/Requires: Includes:1 x motor 1 x prop adaptor 1 x ...HiModel
HL W46-25 390KV OUTRUNNER BRUSHLESS DISK TYPE MOTOR FOR 600-700 CLASS MULTI-ROTOR AIRCRAFT (FOR 6S)
| Model | W46-25 390KV |
| Idol current | 0.9A at 22.2V |
| Net weight | 114g (excluding prop adaptor) |
| Mounting hole spacing | 19mm/25mm or 25mm/ 25mm (cross side) |
| Max cell number supported | 6S Lipo |
| Wire length | 50CM |
| Max current | 17A |
| Working current | <12A |
| Max power | 320W |
| Internal resistance | 0.130Ω |
Specifications:, ,
Includes/Requires: Includes:1 x motor 1 x prop adaptor 1 x ...HiModel
HL W46-25 560KV OUTRUNNER BRUSHLESS DISK TYPE MOTOR FOR 600-700 CLASS MULTI-ROTOR AIRCRAFT (FOR 4S)
| Model | W46-25 560KV |
| Idel current | 1.1A at 14.8V |
| Net weight | 114g (excluding prop adaptor) |
| Mounting hole spacing | 19mm/25mm or 25mm/ 25mm (cross side) |
| Max cell number supported | 4S Lipo |
| Max current | 21A |
| Working current | <15A |
| Max power | 320W |
| Internal resistance | 0.077Ω |
Specifications:, ,
Includes/Requires: Includes:1 x motor 1 x prop adaptor 1 x ...HiModel
HL W46-25 690KV OUTRUNNER BRUSHLESS DISK TYPE MOTOR FOR 600-700 CLASS MULTI-ROTOR AIRCRAFT (FOR 4S)
| Model | W46-25 690KV |
| Idel current | 1.5A at 14.8V |
| Net weight | 114g (excluding prop adaptor) |
| Mounting hole spacing | 19mm/25mm or 25mm/ 25mm (cross side) |
| Max cell number supported | 4S Lipo |
| Max current | 23A |
| Working current | <17A |
| Max power | 320W |
| Internal resistance | 0.056Ω |
Specifications:, ,
Includes/Requires: Includes:1 x motor 1 x prop adaptor 1 x ...